Changes between Version 11 and Version 12 of v2x


Ignore:
Timestamp:
07/14/2022 11:40:19 PM (3 years ago)
Author:
Ryan Erbstoesser
Comment:

add 720xx

Legend:

Unmodified
Added
Removed
Modified

  • v2x

    v11 v12  
    1212
    1313To enable 5V access on the J10 Mini-PCIe slot, the following resistors need to be loaded at the Gateworks factory before ordering:
     14
     15GW72xx:
     16 * Load R152, R153, R144, R145 for 5V (use 02240128 which is a 0402 0-Ohm resistor)
     17  * This enables 5V on pins 3, 5, 45, 47
     18
     19The below resistors are for the UART and are by default unloaded on the GW7301 to avoid any conflicts:
     20 * R164, R165 for UART3 (use 02240128) (Pins 17 & 19)
     21
     22
     23GW73xx:
    1424 * Load R5, R6, R102, R101 for 5V (use 02240128 which is a 0402 0-Ohm resistor)
    1525  * This enables 5V on pins 3, 5, 45, 47