Venice Boot Firmware

The 'Boot Firmware' for Venice is defined as the combination of the firmware stages through up to and including the bootloader. This can be broken down into the following stages:

• Boot ROM (internal on i.MX8 SoC): fetch first level boot firmware from boot device (ie MMC or SPI FLASH) into L2 cache
• SPL (Secondary Program Loader) - (U-Boot)
• ATF (ARM Trusted Firmware)
• Bootloader (U-Boot)

Gateworks provides ​pre-built Boot Firmware ready to flash onto boot devices as well as source for building and/or modifying the boot firmware yourself.

i.MX8 BOOT ROM

The BOOT ROM is firmware baked into the SoC and is in charge of loading code from the 'boot device' into an L2 cache scratchpad, verifying signatures (if using trusted boot) and executing it.

The BOOT ROM fetches code from an offset of 33KiB on the boot device which leaves the first 33KiB available for other firmware needs.

Boot Firmware Image

The firmware image contains all of the components of the 'Boot Firmware':

• ARM Trusted Firmware (ATF)
• SPL
• U-Boot
• U-Boot environment

This firmware is typically put on the eMMC boot0 hardware partition to keep it separate from the eMMC user partition used for the OS.

Venice Boot Firmware Image Map:

• imx8mm:

start-end	len	item	notes
0x00000000 - 0x00008400	33KiB	unused
0x00008400 - 0x00060000	351KiB	SPL (spl.bin)	Loads and u-boot.itb and transfers control to the ATF
0x00060000 - 0x003F0000	3648KiB	U-Boot (u-boot.itb)	FIT image containing u-boot, ATF, and fdt
0x003F0000 - 0x00400000	64KB	U-Boot env	redundant 32KB env

• imx8mn/imx8mp:

start-end	len	item	notes
0x00000000 - 0x00058000	352KiB	SPL (spl.bin)	Loads and u-boot.itb and transfers control to the ATF
0x00058000 - 0x003F0000	3680KiB	U-Boot(u-boot.itb)	FIT image containing u-boot, ATF, and fdt
0x003F0000 - 0x00400000	64KB	U-Boot env	redundant 32KB env

Note that while the size of the SPL and offset/size of U-Boot can vary based on bootloader configuration the start offset of the SPL is dictated by the SOC-specific BOOTROM and varies based on the boot device and hardware partition:

• imx8mm:
  • eMMC user partition: 33KiB
  • eMMC boot partition: 33KiB
• imx8mn/imx8mp:
  • eMMC user partition: 32KiB
  • eMMC boot partition: 0KiB

Legacy Boot Firmware Image

The original Gateworks IMX8MM Boot Firmware (now considered legacy) was installed to the eMMC user hardware partition.

Legacy Venice IMX8MM Boot Firmware Image Map:

start-end	len	item	notes
0x00000000 - 0x00008400	33KiB	MBR Partition Table	only first 512B used
0x00008400 - 0x00060000	351KiB	SPL (spl.bin)	Loads and u-boot.itb and transfers control to the ATF
0x00060000 - 0x00FF0000	15MiB	U-Boot (u-boot.itb)	FIT image containing u-boot, ATF, and fdt
0x00FF0000 - 0x01000000	64KB	U-Boot env	redundant 32KB env
0x01000000 -		Disk Partitions	used by the OS

U-Boot Bootloader

Gateworks supports the U-Boot Bootloader for the Venice product family.

The purpose of a bootloader is to load the Linux kernel and execute it passing it configuration parameters such as an optional kernel command-line, an optional initial ramdisk filesystem, and a device-tree.

The following items are supported in the Gateworks U-Boot for Venice:

• IMX8M FEC GbE
• IMX8MP EQOS GbE
• USB Host support (USB Mass Storage and USB Networking for ASIX USB 2.0 USB Network device)
• eMMC / microSD

The following items are not currently supported in the Gateworks U-Boot for Venice:

• PCIe support (include PCIe based Gbe)

see uboot for more info