Changes between Version 18 and Version 19 of venice/ethernet


Ignore:
Timestamp:
10/25/2024 11:26:25 PM (4 weeks ago)
Author:
Ryan Erbstoesser
Comment:

specify loading part for switch

Legend:

Unmodified
Added
Removed
Modified

  • venice/ethernet

    v18 v19  
    66||= Board =||= Connector =||= Silkscreen =||= U-Boot =||= Linux =||= MAC/Phy =||= Notes =||
    77|| GW740x  || J21 || Eth!#0 || eth0 || eth0 || IMX8MP EQOS (0x30bf0000) RGMII GPY111 || 802.3at class5 PoE ||
    8 ||         ||  -  ||   -   || eth1 || eth1 || IMX8MP FEC (0x30be0000) RGMII KSZ9897STXI/KSZ9477 Port6 || cpu uplink ||
     8||         ||  -  ||   -   || eth1 || eth1 || IMX8MP FEC (0x30be0000) RGMII KSZ9897STXI Port6 || cpu uplink, uses KSZ9477 SW driver ||
    99||         || J22 || Eth!#1 || lan1 || lan1 || KSZ9477 Port1 || Passive 8-60V PoE ||
    1010||         || J22 || Eth!#2 || lan2 || lan2 || KSZ9477 Port2 || ||
    … …  
    3434
    3535== GW740x Ethernet Notes
     36
     37The GW740x uses the Microchip KSZ9897STXI part.
     38
     39This part uses the KSZ9477 driver.
    3640
    3741The GW740x has 6 RJ45's on the front panel. When looking at the board
    … …  
    103107=== GW7400 Switch
    104108
    105 The GW74xx switched ports utilize a KSZ9897STXI/KSZ9477 switch by Microchip. 
     109The GW74xx switched ports utilize a KSZ9897STXI (SW driver KSZ9477) switch by Microchip. 
    106110
    107111This is a Distributed Switch Architecture (DSA) setup. Thus, this is not a 'basic hub' that has everything hardwired together.