Changes between Version 20 and Version 21 of venice/ethernet

Timestamp:

10/23/2025 06:04:17 PM (42 hours ago)

Author:

Ryan Erbstoesser

Comment:

update eth for latest rev 74xx

venice/ethernet

@@ -6 +6 @@
 Venice Ethernet device mapping:
 ||= Board =||= Connector =||= Silkscreen =||= U-Boot =||= Linux =||= MAC/Phy =||= Notes =||
-|| GW740x  || J21 || Eth!#0 || eth0 || eth0 || IMX8MP EQOS (0x30bf0000) RGMII GPY111 || 802.3at class5 PoE || 
+|| GW740x  || J24 || Eth!#0 || eth0 || eth0 || IMX8MP EQOS (0x30bf0000) RGMII GPY111 || 802.3at class5 PoE || 
 ||         ||  -  ||   -   || eth1 || eth1 || IMX8MP FEC (0x30be0000) RGMII KSZ9897STXI Port6 || cpu uplink, uses KSZ9477 SW driver || 
-||         || J22 || Eth!#1 || lan1 || lan1 || KSZ9477 Port1 || Passive 8-60V PoE || 
-||         || J22 || Eth!#2 || lan2 || lan2 || KSZ9477 Port2 || ||
-||         || J23 || Eth!#3 || lan3 || lan3 || KSZ9477 Port3 || ||
-||         || J23 || Eth!#4 || lan4 || lan4 || KSZ9477 Port4 || ||
-||         || J24 || Eth!#5 || lan5 || lan5 || KSZ9477 Port5 || ||
+||         || J25 || Eth!#1 || lan1 || lan1 || KSZ9477 Port1 || Passive 8-60V PoE || 
+||         || J25 || Eth!#2 || lan2 || lan2 || KSZ9477 Port2 || ||
+||         || J26 || Eth!#3 || lan3 || lan3 || KSZ9477 Port3 || ||
+||         || J26 || Eth!#4 || lan4 || lan4 || KSZ9477 Port4 || ||
+||         || J27 || Eth!#5 || lan5 || lan5 || KSZ9477 Port5 || ||
 ||||
 || GW730x  || J20 || Eth!#0 || eth0 || eth0 || IMX8MM FEC RGMII GPY111 ||  802.3at class4 PoE 
@@ -30 +30 @@
     }}}
  * For boards like the GW740x which have a multi-port GbE switch, bandwidth is shared across the downstream ports
+ * Note, GW74xx reference designation were different for very early revision boards. Contact Gateworks support if required. 
 
 == IEEE 1588 PTP Linux !TimeSync