| | 1 | = Venice GW7905 |
| | 2 | |
| | 3 | The Venice GW7905 is a small single board computer that features a half-card Mini-PCIe slot, a full size Mini-PCIe slot, and USB. |
| | 4 | |
| | 5 | The GW7905 can be used with a GW7020 SOM that features the NXP i.MX8M Plus processor. |
| | 6 | |
| | 7 | == Connectors |
| | 8 | |
| | 9 | === J13 Power |
| | 10 | A 2MM pitch power header that supports 3.6 to 20V DC input. |
| | 11 | The 2-pin connector is at location J15 in a 1x2x2mm configuration. The mating connector is PAP-02V-S, available from Digikey as part number 455-1486-ND.. |
| | 12 | Pin 1 is power, and Pin 2 is ground. |
| | 13 | |
| | 14 | === J14 USB |
| | 15 | |
| | 16 | This is a USB TYPE-C that can support USB 3.0 speeds and power delivery to the board |
| | 17 | |
| | 18 | === J1 USB |
| | 19 | |
| | 20 | This is a USB TYPE-C that can support USB 3.0 speeds and power output from the board |
| | 21 | |
| | 22 | === J15 MicroSD |
| | 23 | |
| | 24 | A microSD socket with ESD protection |
| | 25 | |
| | 26 | === J3 GPIO Expansion |
| | 27 | |
| | 28 | A 2x10 connector (20 pins total) that supports a variety of signals as defined in the screenshot below. |
| | 29 | |
| | 30 | The connector is a 20-pin header in a 2x10 configuration with 1.25mm pin spacing. The mating connector is a JST GHDR-20V-S, available from Digi-Key as part number 455-1913-ND. The mating connector pins are JST SGHD-002GA-P0.2, available from Digi-Key as part number 455-1914-2-ND. The digital I/O signals include signal conditioning in the form of a series 332 ohm resistor. |
| | 31 | |
| | 32 | |
