Changes between Version 17 and Version 18 of venice/thermal


Ignore:
Timestamp:
02/18/2026 10:39:21 PM (43 hours ago)
Author:
Ryan Erbstoesser
Comment:

update wording, change can to fan and add digikey link

Legend:

Unmodified
Added
Removed
Modified

  • venice/thermal

    v17 v18  
    4242
    4343An example fan is the Gateworks GW10130 fansink (fan mounted on top of a heatsink) shown here:
    44 [https://shop.gateworks.com/index.php?route=product/product&product_id=216&search=gw10130]
     44[https://www.digikey.com/en/products/detail/gateworks-corporation/GW10130/28717444?]
    4545 * Please note, it has been observed that the GW10130 fansink can provide around a 25C degree improvement in CPU temperature on a GW7200 with a i.MX8M Mini CPU.
    4646
    … …  
    6262Please note the GW702x SOM (i.MX8M Plus) has an exposed die, and thus special consideration needs to be taken with the heatsink, etc and thus the GW10130 fansink will not work.
    6363
    64 We do not have a preferred fan for Venice from DigiKey. The key is the wire and connector that is connected to our board. Note, any standard 5V can with the proper signals above should work fine, but order one to test and confirm.
     64We do not have a preferred fan for Venice from DigiKey. The key is the wire and connector that is connected to our board. Note, any standard 5V fan with the proper signals above should work fine, but order one to test and confirm.
    6565
    6666== Venice Thermal Resistances