Changes between Version 4 and Version 5 of ventana/LVDS

Timestamp:

01/23/2019 12:26:04 AM (6 years ago)

Author:

Ryan Erbstoesser

Comment:

add collapses for gateworks lcds

ventana/LVDS

@@ -282 +282 @@
 [=#XGA-10in]
 === Freescale MCIMX-LVDS1 10" XGA Touchscreen Display ===
-[[CollapsibleStart]]
+[[CollapsibleStart(Expand Details)]]
 The 'Freescale LVDS1' or 'MCIMX-LVDS1' was originally designed for an i.MX53 dev kit and is a LCD+Backlight-controller+Touchscreen-controller.
 
@@ -330 +330 @@
 [=#WSVGA-7in]
 === GW17029 DLC700JMGT4 7" WSVGA Touchscreen Display ===
+This display is no longer carried by Gateworks.
+[[CollapsibleStart(Expand Details)]]
 The GW17029 DLC700JMGT4 7" WSVGA Touchscreen Display is a low-cost display supporting:
  * 7" LCD 1024x600 display with backlight
@@ -381 +383 @@
 }}}
 
-
+[[CollapsibleEnd]]
 [=#XGA-8in]
-=== GW17030 DLC800FIGT3 8" XGA Touchscreen Display - SPECIAL ORDER - 250 Piece Minimum ===
+=== GW17030 DLC800FIGT3 8" XGA Touchscreen Display===
+This display is no longer carried by Gateworks.
+[[CollapsibleStart(Expand Details)]]
 The GW17030 DLC800FIGT3 8" XGA Touchscreen Display is a low-cost display supporting:
  * 8" LCD 1024x768 display with backlight
@@ -435 +439 @@
 saveenv
 }}}
-
-==== Setup ====
+[[CollapsibleEnd]]
+=== Gateworks LCD Setup ====
 This setup applies to the Gateworks 7 and 8" LCD kits.
+[[CollapsibleStart(Expand Details)]]
 
  * 8" XGA (1024x768) display with backlight and 5pt capacitive touch:
@@ -455 +460 @@
  3. Plug the single end of the cable onto the Ventana board LVDS connector.
 [[Image(ventanalvdsconnector.jpg,400px)]]
-
+[[CollapsibleEnd]]
 
 [=#selection]