Changes between Version 13 and Version 14 of wireless/modem/AMITMDG

Timestamp:

01/11/2022 04:49:58 PM (3 years ago)

Author:

Ryan Erbstoesser

Comment:

change pic, add antenna information

wireless/modem/AMITMDG

@@ -5 +5 @@
 Please consult sales for specific certifications and part SKUs. The MDG100 and MDG200 are the same systems with the following differences:
 * The MDG100 has only Verizon certification.  It's available in mPCIe and PCIe form factor.
-* The MDG200 has AT&T, Verizon, PTCRB certification.  It's available in mPCIe, M.2, and PCIe form factor. 
+* ***Recommended*** The MDG200 has AT&T, Verizon, PTCRB certification.  It's available in mPCIe, M.2, and PCIe form factor. 
  * Gateworks sells the MDG200 as a GW17050 ([https://shop.gateworks.com/index.php?route=product/product&product_id=241 Purchase Here])
 
-[[Image(mdg100.png, width=400)]]
+[[Image(amitmodem.jpg, width=400)]]
 
 = Certification
@@ -24 +24 @@
 = Hardware setup
 
-== MGT100
+== MDG100
 
 Install the SIM on the backside of the modem, the bracket slides then opens like a book.  Pads on the SIM face contacts on the carrier, close then slide to lock in place.  Attach your antennas, the modem PCB is labeled next to the U.FL connectors, look for the box labeled "CON1" (a jewelers loop may be required to read).  
@@ -32 +32 @@
 Configure your SBC with the latest Ubuntu image (in the example Newport-Focal was used).  
 
-== MGT200
+== MDG200
 
 This Modem consists of two pieces, a mPCI-e adapter board, and the modem itself.  
@@ -47 +47 @@
 
 Finally attach your antennas. 
+
+== Antennas
+ * QTY 2 I-PEX connector for external LTE antenna
+ * QTY 1 I-PEX connector for external GPS antenna
+
+Gateworks sells the [https://shop.gateworks.com/index.php?route=product/product&product_id=89 GW16065] cellular antenna and the [https://shop.gateworks.com/index.php?route=product/product&product_id=42 GW10036] pigtail. 
 
 = Software configuration