Changes between Version 109 and Version 110 of wireless/modem

Timestamp:

03/27/2024 11:40:16 PM (12 months ago)

Author:

Ryan Erbstoesser

Comment:

update telit to be fn990 instead of fn980

wireless/modem

@@ -45 +45 @@
 
  * [http://www.gateworks.com/product/item/gw16126-mini-pcie-modem-bluetooth-radio Gateworks GW16126/GW16132] - LTE CAT M1 - Slower IoT speeds
- * [#TelitFN980FN980M5GModem Telit FN990 5G Modem] (USB Mode)
+ * [#fn990 Telit FN990 5G Modem] (USB Mode)
  * Telit LM910/920/940/960 LTE Modem (USB Mode)
  * [https://www.telit.com/devices/mv32/ Telit MV32] - 5G, Global, eSIM
@@ -1859 +1859 @@
 
 [=#telitfn980m]
-== Telit FN980 / FN980M 5G Modem ==
-
- * Now recommended typically to use the Telit FN990 * 
-
-This is a 5G Modem by Telit that comes in the M.2 form factor (Size 30mm wide x 50 mm long)
+[=#fn990]
+== Telit FN990 5G Modem ==
+
+
+
+This is a 5G Modem by Telit that comes in the M.2 form factor (Size 30mm wide x 52 mm long)
 
 View official Telit website [https://www.telit.com/ here]
 
- * The FN980 supports 5G FR1 and the FN980M supports 5G FR1 & FR2
- * Support of 5G Sub-6 FDD and TDD and mmWave, support of SA & NSA operations, 5G core network Opt. 3a/3x and Option 2
+ * The FN990 supports 5G FR1 
+ * Support of 5G Sub-6 FDD and TDD, support of SA & NSA operations, 5G core network Opt. 3a/3x and Option 2
  * Made for North America, EMEA, APAC
  * Use with Gateworks GW16140 or GW16141 M.2 Adapter. [https://www.gateworks.com/products/mini-pcie-expansion-cards/gw1614x-mini-pcie-to-m2-adapter-card/]
  * Approvals: FCC, PTCRB, RED, GCF & More (consult datasheet)
  * Supports USB 2.0, 3.0 and PCIe Gen3
-  * USB 3.0 is not supported on most Venice SBCs. 
-  * USB 3.0 requires software configuration for some Newport SBCs [wiki:newport/bootloader#hwconfig]
-  * PCIe on the Qualcomm X55 chipset require a new MHI driver which is expected to be only ready in 5.13 kernels or newer
+  * USB 3.0 is not supported on most Venice SBCs. Available when using i.MX8M Plus SOM. 
+  * PCIe on the Qualcomm X62(A28) & X65 (A40) chipset require a new MHI driver which is expected to be only ready in 5.13 kernels or newer
    * PCIe ID: 17cb:0306 
- * Theoretical throughput 5G up to 5.5 DL/1.5 UL Gbps
+ * Theoretical NSA throughput:
+  * 4.9 Gbps DL / 0.55 Gbps UL for FN990A40
+  * 3.4 Gbps DL / 0.46 Gbps UL for FN990A28
  * Temperature -40 °C to +85 °C
  * GNSS
+ * The FN990A40 data card is based on Snapdragon X65, targeting high-tier market needs.
+ * The FN990A28 data card is based on Snapdragon X62, targeting mid-tier market needs.
  * Uses QTY 4 MHP4 IPEX antenna ports. Can be used with [https://shop.gateworks.com/index.php?route=product/product&product_id=89 GW16065]
  * No pinout concerns when using Gateworks GW16140/GW16141 M.2 adapters
@@ -1887 +1891 @@
   * qmi_wwan, option1
  * Board support 
-  * Best used with modern kernel, 5.4 or newer and something like Ubuntu
+  * Best used with modern kernel, 6.1 or newer and something like Ubuntu
   * Venice SBCs (GW71xx, GW72xx, GW73xx) - Tested and validated working with USB 2.0 and GW16140 M.2 Adapter
-  * Newport SBCs (GW61xx, GW62xx, GW63xx, GW64xx) - Tested and validated with USB 2.0 (GW16140) and USB 3.0 (GW16141 Adapter) 
   * Ventana SBCs (GW5xxx) - Tested and validated working with USB 2.0 and GW16140 M.2 Adapter and Ubuntu Focal using 5.4 kernel
   
@@ -1917 +1920 @@
   --------------------------------
   Hardware |         manufacturer: Telit
-           |                model: FN980m
-           |    firmware revision: M0H.020001
+           |                model: FN990
+           |    firmware revision: xx
            |       carrier config: default
            |         h/w revision: 1.00
@@ -2005 +2008 @@
 [[CollapsibleEnd]]
 
-== Telit FN980M PCIe Mode
+== Telit FN990 PCIe Mode
 This modem supports PCIe, which is new for modems. PCIe is valuable for faster bus speeds compared to USB. This requires a new MHI driver only in latest kernels (5.15+) available on Venice SBCs. Contact Gateworks support for other board families.