Changes between Version 3 and Version 4 of OpenWrt/webadmin

Timestamp:

09/09/2025 04:24:26 PM (7 weeks ago)

Author:

Ryan Erbstoesser

Comment:

add note for 7100

OpenWrt/webadmin

@@ -21 +21 @@
 3. Click on the System tab, then the Administration tab.
 4. Create a Password and click on Save & Apply at the bottom of the screen. The board can now also be accessed through SSH if desired.
+
+== Troubleshooting
+
+The Venice GW7100 is unique in that it only has one ethernet port.
+
+On a Venice GW7200, one ethernet port is the LAN and one is the WAN.
+
+Only the LAN can access the webgui.
+
+OpenWrt 24.10 puts the GW7100 eth0 into WAN by default, thus the firewall is blocking any gui request.
+
+Try disabling the firewall via command line first for a test and then adjust accordingly (meaning place GW7100 eth0 into a LAN if desired rather than WAN using the /etc/config/network file).
+
+{{{
+root@OpenWrt:~# uci show firewall | grep 80
+firewall.@rule[4].src_ip='fe80::/10'
+root@OpenWrt:~# /etc/init.d/firewall status
+active with no instances
+root@OpenWrt:~# /etc/init.d/firewall stop
+root@OpenWrt:~# /etc/init.d/firewall status
+inactive
+}}}