Connector and Cable Information

Gateworks provides alternate connectors for specific items on the SBC. These alternate connectors are typically used for rugged applications where a more flat profile or locking connector is needed.

Power Connectors

Gateworks typically loads a 2.5mm barrel jack connector for power however most boards include alternate holes for 0.156"/3.96mm spaced power connectors. Here is a list of common connectors that Gateworks stocks. Contact support for more information on having your board loaded with one of these alternate connectors.

• Molex Vertical (locking, non-shrouded)-GW#02050506:
  • ​http://www.digikey.com/product-search/en?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=26-60-4020

• AMP/Tyco Horizontal (locking, non-shrouded)-GW#02050194:
  • ​http://www.digikey.com/product-search/en?pv88=2&k=640389-2&mnonly=0&newproducts=0&ColumnSort=0&page=1&quantity=0&ptm=0&fid=0&pageSize=25

• JST Vertical (locking, shrouded)-GW#02050561:
  • ​http://www.digikey.com/product-search/en?vendor=0&keywords=B2P-VH-FB-B%28LF%29%28SN%29

• JST Horizontal (locking, non-shrouded)-GW#02050680:
  • ​http://www.digikey.com/product-search/en?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=B2PS-VH(LF)(SN)

Ethernet Connectors

Ethernet requires 8 pins for gigabit and 4 pins for 10/100.

We typically use a 2x4 connector with 2mm spacing and through-hole.

• JST 8 pin right angle- Shrouded GW#02050686
  • S08B-PUDSS-1(LF)(SN)
  • Digi-Key Part Number: 455-2485-ND ​Link Here

• JST 8 pin vertical - Shrouded GW#02050649
  • B08B-PUDSS(LF)(SN)
  • Digi-Key Part Number: 455-2485-ND ​Link Here

• Samtec 8 pin right angle header - Shrouded GW#02050737
  • T2M-104-01-L-D-RA-WT
• Laguna GW2380/GW2382 - 8 Pin GW #02050633
  • Molex 53261-0871
  • Digi-Key Corporation WM7626DKR-ND/WM7626CT-ND

Ventana Alternate Ethernet Connector

GW5100 Alternate Ethernet Connector

The RJ45 Ethernet connector on the GW5100 can be replaced with an 8-pin pico-Molex connector (Gateworks Part No: 02050633).

• Part Number Molex 0532610871
• Digi-Key Part Number: WM7626TR-ND ​Link Here

USB Connectors

USB is typically 8 pins and SMT.

• USB Host - 8 pin Vertical Shrouded 2x4x2MM
  • Molex 87832-0810
  • GW 02050611
  • ​Digi-Key

• USB OTG (Ventana) - Vertical Latching - 1X4X1.25MM
  • Hirose DF13-4P-1.25DSA
  • GW 02050699
  • 1X4X1.25MM

JTAG / 2x5 10 Pin Connectors

This is a 10 pin small header. (2X5X0.05IN,1.75A,HEADER)

Cables are available for purchase here: ​http://shop.gateworks.com/index.php?route=product/product&path=70_80&product_id=24

Cables made use: Samtec FFSD-05-D-03.00-01-N

The connector on the board itself: Samtec FTSH-105-01-L-DV-K-A

Peripheral Adapters

• See the following for Ventana breakout adapters: Ventana Peripheral Adapters

Ventana Cable Connector Information

The Ventana boards use a variety of JST 2mm spacing connectors for the different I/O ports (RS232, CAN, DIO, video, analog, tamper, etc.). Mates to these connectors can be purchased at Digikey. Here is the info for the various connectors:

JST 1x2 (2mm spacing)

Gateworks Online Shop 2 pin to bare leads:

• ​http://shop.gateworks.com/index.php?route=product/product&product_id=185&search=jst

Gateworks Online Shop 2 pin to 2 pin:

• ​http://shop.gateworks.com/index.php?route=product/product&product_id=61&search=jst

Onboard Connector

• ​http://www.digikey.com/product-search/en?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=B02B-PASK-1(LF)(SN)

Mate Connector Housing

• ​http://www.digikey.com/product-detail/en/PAP-02V-S/455-1486-ND/759974

Mate Crimps (note – see associated products under the connector housing for other crimp options)

• ​http://www.digikey.com/product-detail/en/SPHD-002T-P0.5/455-1313-1-ND/608809

JST 1x3 (2mm spacing)

Gateworks Online Shop 3 pin to bare leads:

• ​http://shop.gateworks.com/index.php?route=product/product&product_id=186&search=jst

Onboard Connector

• ​http://www.digikey.com/product-search/en?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=B03B-PASK-1(LF)(SN)

Mate Connector Housing

• ​http://www.digikey.com/product-detail/en/PAP-03V-S/455-1487-ND/759975

Mate Crimps (note – see associated products under the connector housing for other crimp options)

• ​http://www.digikey.com/product-detail/en/SPHD-002T-P0.5/455-1313-1-ND/608809

JST 1x4 (2mm spacing)

Please see DigiKey and User Manual.

Gateworks Online Shop 4 pin to RJ45 (could be cut)

• ​http://shop.gateworks.com/index.php?route=product/product&product_id=19&search=jst

JST 1x5 (2mm spacing)

Gateworks Online Shop 5 pin to bare leads

• ​http://shop.gateworks.com/index.php?route=product/product&product_id=187&search=jst

Gateworks Online Shop 5 pin to 5pin

• ​http://shop.gateworks.com/index.php?route=product/product&product_id=142&search=jst

Onboard Connector

• ​http://www.digikey.com/product-search/en?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=B05B-PASK-1(LF)(SN)

Mate Connector Housing

• ​http://www.digikey.com/product-detail/en/PAP-05V-S/455-1489-ND/759977

Mate Crimps (note – see associated products under the connector housing for other crimp options)

• ​http://www.digikey.com/product-detail/en/SPHD-002T-P0.5/455-1313-1-ND/608809

JST 1x6 (2mm spacing)

Often used for SPI, a 6-pin header in a 1x6 configuration with 2mm spacing.

Onboard Connector

• JST B06B-PASK-1(LF)(SN)

Mate Connector Housing

• The mating connector is a JST PAP-06V-S, available from Digi-Key as part number 455-1490-ND.

Mate Crimps (note – see associated products under the connector housing for other crimp options)

• The mating connector pins are JST SPHD-002T-P05, available from Digi-Key as part number 455-1313-1-ND.

GW5510 30-pin Connector

The 30 pin J3 connector information is listed in the manual as a Samtec SFSD series. ( The GW16111 is a development adapter).

Rated up to 2.9A per pin.

There is no single direct part number because the wiring gauge will differ for each customer, etc. There are many options.

Document from Samtec:

• ​http://suddendocs.samtec.com/catalog_english/sfsd.pdf

Samples may be available on the following link here: ​https://www.samtec.com/technical-specifications/default.aspx?seriesMaster=SFSD

Example Digikey link: ​http://www.digikey.com/product-search/en?k=sfsd-15&mnonly=0&newproducts=0&ColumnSort=-1000011&page=1&stock=0&pbfree=0&rohs=0&quantity=&ptm=0&fid=0&pageSize=25

GW5100 and GW5520 Peripheral Connectors / 2x5 10 Pin Connectors

This is a 10 pin small header. (2X5X0.05IN,1.75A,HEADER)

Cables are available for purchase here: ​http://shop.gateworks.com/index.php?route=product/product&path=70_80&product_id=24

Cables made use: Samtec FFSD-05-D-03.00-01-N

The connector on the board itself: Samtec FTSH-105-01-L-DV-K-A

GW16112 USB Expansion Board Connector Information

Gateworks sells an accessory cable pre-made here: ​GW10102 USB Cable

The connector on our board is:

CONT,90DEG,MICRO-LOCK,1X4X1.25MM,SHRD

Molex 504195-0470

​http://www.digikey.com/product-search/en?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=504195-0470

The mating connector on digi-key is being shown as: Molex 504193-0400

​http://www.digikey.com/product-detail/en/5041930400/WM10575-ND/4879321

GW16113 Expansion Card Cable Information

The GW16113 is a Mini-PCIe I/O Card. Gateworks has produced a pre-made cable, GW10103.

There are 3 connectors on the card for signalling, all connectors are the same.

Connector Shell

• Molex 504193-1000

Connector Terminals

• Molex 504185-1000