wiki:alternateconnectors

Context Navigation

Version 6 (modified by Ryan Erbstoesser, 6 years ago) ( diff )
reduce picture size 10132

Connector and Cable Information
Ventana Cable Connector Information
GW5510 30-pin Connector
GW5100 and GW5520 Peripheral Connectors / 2x5 10 Pin Connectors
GW16112 USB Expansion Board Connector Information
GW16113 Expansion Card Cable Information

Connector and Cable Information

Gateworks provides alternate connectors for specific items on the SBC. These alternate connectors are typically used for rugged applications where a more flat profile or locking connector is needed.

Power Connectors

Gateworks typically loads a 2.5mm barrel jack connector for power however most boards include alternate holes for 0.156"/3.96mm spaced power connectors. Here is a list of common connectors that Gateworks stocks. Contact support for more information on having your board loaded with one of these alternate connectors.

Molex Vertical (locking, non-shrouded)-GW#02050506:
- http://www.digikey.com/product-search/en?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=26-60-4020

AMP/Tyco Horizontal (locking, non-shrouded)-GW#02050194:
- http://www.digikey.com/product-search/en?pv88=2&k=640389-2&mnonly=0&newproducts=0&ColumnSort=0&page=1&quantity=0&ptm=0&fid=0&pageSize=25

JST Vertical (locking, shrouded)-GW#02050561:
- http://www.digikey.com/product-search/en?vendor=0&keywords=B2P-VH-FB-B%28LF%29%28SN%29

JST Horizontal (locking, non-shrouded)-GW#02050680:
- http://www.digikey.com/product-search/en?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=B2PS-VH(LF)(SN)

Barrel Jack, Panel Mount (locking)
- CUI - PJ-065B https://www.digikey.com/products/en?keywords=CUI%20-%20PJ-065B
- Mating plug: https://www.digikey.com/product-detail/en/tensility-international-corp/50-00011/839-1419-ND/8020954
- Mating cable (right angle): https://www.digikey.com/product-detail/en/tensility-international-corp/10-00124/839-1015-ND/2123079
- Mating cable (straight): https://www.digikey.com/products/en?keywords=Tensility%2010-00120
- Entire AC/DC Supply with connector, typically available in high volume through [www.meanwell.com]
- Example 2-Pin JST to Locking Barrel (GW10132)for boards such as the GW5100

Ethernet Connectors

Ethernet requires 8 pins for gigabit and 4 pins for 10/100.

We typically use a 2x4 connector with 2mm spacing and through-hole.

JST 8 pin right angle- Shrouded GW#02050686
- S08B-PUDSS-1(LF)(SN)
- Digi-Key Part Number: 455-2485-ND Link Here

JST 8 pin vertical - Shrouded GW#02050649
- B08B-PUDSS(LF)(SN)
- Digi-Key Part Number: 455-2485-ND Link Here

Samtec 8 pin right angle header - Shrouded GW#02050737
- T2M-104-01-L-D-RA-WT
Laguna GW2380/GW2382 - 8 Pin GW #02050633
- Molex 53261-0871
- Digi-Key Corporation WM7626DKR-ND/WM7626CT-ND

Ventana Alternate Ethernet Connector

GW5100 Alternate Ethernet Connector

The RJ45 Ethernet connector on the GW5100 can be replaced with an 8-pin pico-Molex connector (Gateworks Part No: 02050633).

Part Number Molex 0532610871
Digi-Key Part Number: WM7626TR-ND Link Here

USB Connectors

USB is typically 8 pins and SMT.

USB Host - 8 pin Vertical Shrouded 2x4x2MM
- Molex 87832-0810
- GW 02050611
- Digi-Key

USB OTG (Ventana) - Vertical Latching - 1X4X1.25MM
- Hirose DF13-4P-1.25DSA
- GW 02050699
- 1X4X1.25MM

JTAG / 2x5 10 Pin Connectors

This is a 10 pin small header. (2X5X0.05IN,1.75A,HEADER)

Cables are available for purchase here: http://shop.gateworks.com/index.php?route=product/product&path=70_80&product_id=24

Cables made use: Samtec FFSD-05-D-03.00-01-N

The connector on the board itself: Samtec FTSH-105-01-L-DV-K-A

Peripheral Adapters

See the following for Ventana breakout adapters: Ventana Peripheral Adapters

Ventana Cable Connector Information

The Ventana boards use a variety of JST 2mm spacing connectors for the different I/O ports (RS232, CAN, DIO, video, analog, tamper, etc.). Mates to these connectors can be purchased at Digikey. Here is the info for the various connectors: