Catalina Ethernet
see also ethernet
Catalina Ethernet device mapping:
| Board | Connector | Silkscreen | PHY | U-Boot | Linux1 | Link | |
|---|---|---|---|---|---|---|---|
| GW92xx | J5 (left) | Eth#0 | RGMII DP83867 | eth0 | end0 | i.MX95 ENETC port0 | 10/100/1000 mbps |
| J5 (right) | Eth#1 | RGMII DP83867 | eth1 | end0 | i.MX95 ENETC port1 | 10/100/1000 mbps | |
| J6 | Eth#2 | SERDES AQR113C | eth2 | end2 | i.MX95 ENETC4 port2 | 10/100/1000/2000/2500/10000 mbps |
- Port ordering above is from leftmost RJ45 on board when viewing the front-panel
- Linux network device naming depends on userspace configuration. The listed value here is when using the Gateworks Ubuntu based root filesystem. See [https://systemd.io/PREDICTABLE_INTERFACE_NAMES/ Predictable
Last modified
4 weeks ago
Last modified on 04/27/2026 10:16:50 PM
Note:
See TracWiki
for help on using the wiki.
