Changes between Version 3 and Version 4 of cc135x

Timestamp:

01/16/2020 10:05:55 PM (5 years ago)

Author:

Ryan Erbstoesser

Comment:

add info for recommended boards

cc135x

@@ -19 +19 @@
 == Hardware
 
-Hardware with the CC135x:
+Hardware that contains the CC135x:
  - GW16122-B - CC1352P
   * connected to FTDI UART
@@ -27 +27 @@
    - CBUS3: CC_TCKC output (cJTAG)
  - GW16122-A - CC1350
-  * CC1350 connected to a TI Tiva MCU for programming
+  * CC1350 connected to a TI Tiva MCU for programming *** Not Recommended, use Rev B ***
  - GW5910-C - CC1352P
   * connected on the JTAG chain with the CPU and GSC
   * connected to IMX UART and SPI bus for bootloader access
  - TI Launchpad
-  * these have an XDS110 JTAG Debugger on-board (implemented via the Tiva MCU chip). The XDS110 debugger exposes two USB ACM serial devices where the first one is tied directly to the CC13xx UART (pinout matching the 'serial downloader' pins specified in the TRM) and the second serial device is for JTAG programming. These boards can be programmed via the TI 'Uniflash' tool (GUI or stand-alone command-line) or the CCS IDE.
+  * These have an XDS110 JTAG Debugger on-board (implemented via the Tiva MCU chip). The XDS110 debugger exposes two USB ACM serial devices where the first one is tied directly to the CC13xx UART (pinout matching the 'serial downloader' pins specified in the TRM) and the second serial device is for JTAG programming. These boards can be programmed via the TI 'Uniflash' tool (GUI or stand-alone command-line) or the CCS IDE.
 
 References:
  - http://www.ti.com/product/CC1352R/technicaldocuments
+
+Recommended Gateworks SBCs:
+ * [https://www.gateworks.com/products/imx6-single-board-computer-gateworks-ventana-family/gw5913-single-board-computer/ GW5913 - 1x GbE, 1x Mini-PCIe] 
+ * [https://www.gateworks.com/products/imx6-single-board-computer-gateworks-ventana-family/gw5910-single-board-computer/ GW5910 - 1x GbE, 2x Mini-PCIe]