Changes between Version 12 and Version 13 of conformalcoating


Ignore:
Timestamp:
11/10/2025 10:46:22 PM (2 hours ago)
Author:
Ryan Erbstoesser
Comment:

adjust prices and recommendations

Legend:

Unmodified
Added
Removed
Modified

  • conformalcoating

    v12 v13  
    33Typical coatings include:
    44
    5  * Acrylic (Humiseal IB73) - is a good general purpose coating, about half the cost of Parylene. It provides fair elasticity and general protection. It is a one‐part system, so it is easy to apply and remove. Acrylic conformal coatings are recognized for their high dielectric strength, abrasion resistance and ease of removal. They also have good moisture resistance as well. They are not typically used in applications requiring a high level of chemical and solvent resistance. Typical cost is in the $40 - $60 range.
     5 * Acrylic (Humiseal IB73) (recommended) - is a good general purpose coating, more than half the cost of Parylene. It provides fair elasticity and general protection. It is a one‐part system, so it is easy to apply and remove. Acrylic conformal coatings are recognized for their high dielectric strength, abrasion resistance and ease of removal. They also have good moisture resistance as well. They are not typically used in applications requiring a high level of chemical and solvent resistance. Typical cost is in the $50 - $150 range.
    66
    77
    8 * Parylene - a more expensive coating (>2x acrylic) and typically used by defense contractors for mission critical components. Parylene conformal coating is a unique type of coating applied through vapor phase deposition. It provides excellent dielectric strength and superior resistance to solvents and extreme temperatures. Because of the vapor deposition method, parylene can be applied very thin and still provide excellent circuit board protection. Removal for rework is very difficult, requiring abrasion techniques, and without access to vapor phase deposition equipment, recoating with parylene is impossible. Parylene provides good solvent and moisture resistance. Typical cost is in the $80 - $100 range.
     8* Parylene - a very expensive coating (>2-6x acrylic) and typically used by defense contractors for mission critical components. Parylene conformal coating is a unique type of coating applied through vapor phase deposition. It provides excellent dielectric strength and superior resistance to solvents and extreme temperatures. Because of the vapor deposition method, parylene can be applied very thin and still provide excellent circuit board protection. Removal for rework is very difficult, requiring abrasion techniques, and without access to vapor phase deposition equipment, recoating with parylene is impossible. Parylene provides good solvent and moisture resistance. Typical cost is in the hundreds of dollars range.
    99
    1010Please contact Gateworks sales via email for more information