Changes between Version 26 and Version 27 of enclosures


Ignore:
Timestamp:
02/11/2026 11:24:42 PM (30 hours ago)
Author:
Ryan Erbstoesser
Comment:

add 8200 enclosure instructions

Legend:

Unmodified
Added
Removed
Modified

  • enclosures

    v26 v27  
    33= Enclosures =
    44Gateworks sells a variety of enclosures on their online shop seen here: [http://shop.gateworks.com/index.php?route=product/category&path=76 Gateworks Online Shop - Enclosures]
     5
     6== Indoor VeniceFLEX Enclosure
     7
     8An indoor enclosure has been made for the GW820x VeniceFLEX SBC.
     9The PN is GW3102 and the enclosure is available on Digi-Key.
     10
     11The enclosure ships with 2 heat 'slugs' that help conduct the heat from the CPU and the PCIe switch to the metal enclosure casing.
     12
     13Note, the GW820x SBC uses the i.MX8M Plus CPU, which has an exposed die, which needs extreme caution to not damage.
     14
     15Remove the standard GW820x CPU heatsink by removing the screws and the heatsink.
     16
     17Apply the included thermal stick pads to both sides of the new heat slugs.
     18
     19Screw the heatslugs to the SBC as indicated in the picture below.
     20
     21The sticky surface of the heat slug should then be mated to inside of the enclosure lid.
     22
     23It works best to mate the SBC to the top portion of the enclosure (black fin part) and then install that assembly to the bottom piece of the enclosure.
    524
    625