Changes between Version 15 and Version 16 of expansion/gw16122


Ignore:
Timestamp:
02/21/2018 12:09:46 AM (7 years ago)
Author:
Ryan Erbstoesser
Comment:

progress on getting started links

Legend:

Unmodified
Added
Removed
Modified

  • expansion/gw16122

    v15 v16  
    66== Getting Started ==
    77
     8It is beneficial to read this entire wiki page before getting started to gain knowledge about the product.
     9
    810Gateworks recommends the following setup for getting started and development:
     11
     12=== Hardware Requirements ===
    913 * Gateworks [http://www.gateworks.com/product Ventana or Newport] Single Board Computer
    1014  * Gateworks SBC loaded with [wiki:ventana/ubuntu Ubuntu operating system ]
    … …  
    1216 * Gateworks GW10124 900Mhz Antenna
    1317 * Gateworks GW10074 MMCX to SMA Female Adapter Cable
    14  * [http://www.ti.com/tool/LAUNCHXL-CC1350 Ti CC1350 LaunchPad] - Gateworks SBC and GW16122 are the 'collector'. This CC1350 LaunchPad becomes the 'sensor' for development.
     18 * [http://www.ti.com/tool/LAUNCHXL-CC1350 Ti CC1350 LaunchPad] - Gateworks SBC and GW16122 are the 'collector' in the system. This CC1350 LaunchPad becomes the 'sensor' for development.
    1519 
    16 * The firmware pre-installed on the GW16122 is built from the source code here:
    17 /usr/src/ti/simplelink_cc13x0_sdk_1_40_00_10/examples/rtos/CC1350_LAUNCHXL/ti154stack/coprocessor
    18 
    19 Steps to Getting Started:
    20 * Connect GW16122 to Gateworks SBC
     20=== Software Requirements ===
     21
     22There are 3 or more pieces of software:
     23 1. The firmware pre-installed on the GW16122 is called the !CoProcessor firmware
     24  * [http://www.ti.com/tool/download/SIMPLELINK-CC13X0-SDK SIMPLELINK-CC13X0-SDK Version 1.60.00.21]
     25  * Built from the source code here: /usr/src/ti/simplelink_cc13x0_sdk_1_40_00_10/examples/rtos/CC1350_LAUNCHXL/ti154stack/coprocessor
     26 2. The firmware for the Sensor Node
     27 3. The application running in Ubuntu on the Gateworks SBC [#GateworksSBCTools here]
     28
     29=== Setup Steps ===
     30* Install [wiki:ubuntu Ubuntu 14.04] Trusty on Gateworks SBC
     31* Connect GW16122 to Gateworks SBC in Mini-PCIe slot that supports USB
    2132* Connect ethernet cable to Gateworks SBC on the same network as a PC/Laptop (for web gui viewing)
    2233* Connect antenna to GW16122