Changes between Version 6 and Version 7 of expansion/gw16122

Timestamp:

11/18/2017 12:11:43 AM (7 years ago)

Author:

Ryan Erbstoesser

Comment:

add getting started step by step

expansion/gw16122

@@ -8 +8 @@
 Gateworks recommends the following setup for getting started and development:
  * Gateworks [http://www.gateworks.com/product Ventana or Newport] Single Board Computer
-  * Gateworks SBC loaded with [Ubuntu operating system wiki:ventana/ubuntu] 
+  * Gateworks SBC loaded with [wiki:ventana/ubuntu Ubuntu operating system ] 
  * Gateworks GW16122 IoT Card
  * Gateworks GW10124 900Mhz Antenna
@@ -16 +16 @@
 * The firmware pre-installed on the GW16122 is built from the source code here: 
 /usr/src/ti/simplelink_cc13x0_sdk_1_40_00_10/examples/rtos/CC1350_LAUNCHXL/ti154stack/coprocessor
+
+Steps to Getting Started:
+1. Connect GW16122 to Gateworks SBC
+2. Connect antenna to GW16122
+3. Install Ubuntu for Gateworks SBC 
+4. Install Ti 15.4 Stack on Gateworks board 
 
 == General Information ==