Changes between Version 14 and Version 15 of expansion/gw16160


Ignore:
Timestamp:
03/18/2026 04:46:04 PM (20 hours ago)
Author:
Tim Harvey
Comment:

fix typo (M.2 W_DISABLE1# is pin 56, not 65)

Legend:

Unmodified
Added
Removed
Modified

  • expansion/gw16160

    v14 v15  
    7373The Mosiac-X5 NRST_IN# needs to be floating (internal pu) or driven high at 3.3V to allow the card out of reset.
    7474
    75 The standard GW16160 uses M.2 Pin 65 (W_DISABLE1#) as the source of this reset.
     75The standard GW16160 uses M.2 Pin 56 (W_DISABLE1#) as the source of this reset.
    7676
    7777The GW16160-A revision uses pin 23 SDIO_RESET# for reset which is not normally driven:
    … …  
    9090
    9191Reset Loading Options:
    92  - M.2 Pin 65 W_DISALBE1# (default for GW16160-B+) via R25
     92 - M.2 Pin 56 W_DISABLE1# (default for GW16160-B+) via R25
    9393 - Resistor R20 can be loaded and U7 unloaded to directly connect these if used in a socket where this pin is 3.3V
    9494 - U7 can be unloaded and the internal PU will allow the Mosiac out of reset without the ability to reset it via hardware