Changes between Version 25 and Version 26 of expansion/gw16168


Ignore:
Timestamp:
08/19/2026 09:38:21 PM (2 days ago)
Author:
Tim Harvey
Comment:

added Gateworks board to requirements

Legend:

Unmodified
Added
Removed
Modified

  • expansion/gw16168

    v25 v26  
    1515 1. Proper cooling - A 5V fansink is mounted on the GW16168 and this needs to be connected to the fan header on the GW16FM1-C FSA adapter.
    1616 1. Proper Power - The GW16168 can pull a lot of power, such as 12W. This requires a special M-Key adapter from Gateworks for Gateworks SBCs, which is the GW16FM1-C which also has a 5V fan header (GW16FM0-C is the basic M-Key adapter which doesn't provide enough power or fan header).
    17  1. Proper Software - The drivers and software required for this card are detailed on this page. Note, using the Gateworks SBC is recommended for development. The GW11062 ai development kit comes with drivers and software pre-loaded.
     17 1. Proper Software - The drivers and software required for this card are detailed on this page. Note, using the Gateworks SBC is recommended for development. The GW11062 ai development kit comes with drivers and software pre-loaded.
     18 1. A Gateworks Venice or Catalina board (with the GW16FM1 FSA) - if you are trying to use the GW16168 on a different baseboard, SoC, or architecture you need to refer to NXP for support.
    1819
    1920== Terminology