Changes between Version 15 and Version 16 of gettingstarted

Timestamp:

08/16/2021 04:01:39 PM (3 years ago)

Author:

Ryan Erbstoesser

Comment:

adjust repo info

gettingstarted

@@ -23 +23 @@
  1. Latest firmware, is available to download from [http://dev.gateworks.com/].    After verifying your newly purchased board will boot, be sure to update its bootloader and GSC firmware to the latest version.  
 
-== dev.gateworks.com and the Gateworks GIT repo
 
-The prebuilt images on dev.gateworks.com are based on our latest source code.  If you would like to see the change logs these can be found on [https://github.com/Gateworks our Github page].  Click the repositories tab, search for the board family name, select the repo you're interested in, then click "commits".  Each commit has a note about what changes were made, also a diff in the source code can be viewed.  
 
 = Physical Connections =
@@ -91 +89 @@
   * [wiki:venice Venice]
 
+== dev.gateworks.com and the Gateworks GIT repo
+
+The prebuilt images on dev.gateworks.com are based on our latest source code.  If you would like to see the change logs these can be found on [https://github.com/Gateworks our Github page].  Click the repositories tab, search for the board family name, select the repo you're interested in, then click "commits".  Each commit has a note about what changes were made, also a diff in the source code can be viewed.  
+
 == Installing Firmware ==
 Gateworks Boards are shipped with a default firmware pre-installed, but if you want a specific BSP or version, or want to ensure you have the latest firmware you can update it in a couple different ways: