Changes between Version 53 and Version 54 of jtag_instructions

Timestamp:

01/30/2025 05:35:39 PM (5 weeks ago)

Author:

Ryan Erbstoesser

Comment:

add statement about usb imx8mp

jtag_instructions

@@ -127 +127 @@
  * {{{ sudo rmmod ftdi_sio }}}
 5. Apply power to the Gateworks board.
-6. Run the JTAG program (jtag_usbv4) with the syntax shown below to program a .bin file to the boards flash:
+6. All Venice boards using the i.MX8M Plus processor need a USB cable plugged in between the SBC and the host system. This is in addition the the GW16099 JTAG Dongle
+7. Run the JTAG program (jtag_usbv4) with the syntax shown below to program a .bin file to the boards flash:
 {{{
 ./jtag_usbv4 –p <filename>