Changes between Version 54 and Version 55 of jtag_instructions


Ignore:
Timestamp:
04/16/2025 10:11:34 PM (3 days ago)
Author:
Ryan Erbstoesser
Comment:

remove old link, add picture

Legend:

Unmodified
Added
Removed
Modified

  • jtag_instructions

    v54 v55  
    319319To see if you have the proper drivers installed simply connect the Gateworks JTAG dongle to your Windows PC and look in the 'Device Manager' application under 'COM Ports' to see if a new serial device was added.
    320320
     321[[Image(devicemanager2.jpg,600px)]]
     322
    321323Configure the terminal program for 115,200 baud, 8 data bits, 1
    322324stop bit, no parity and no flow control.
    … …  
    324326Power the board, and wait for text to output.  Hitting the 'Enter' key may also bring up a prompt.
    325327
    326 Please see these excellent howto's for various terminal program on Windows:
    327 - [http://kb.cyberoam.com/default.asp?id=2193 Setup Serial Console Connection using PuTTy]
    328 - [http://www.microsemi.com/document-portal/doc_view/130815-configuring-serial-terminal-emulation-programs Configuring Serial Terminal Emulation Programs (Hyperterm, PuTTy, and Terra Term Pro)]
     328There are many guides that can be found on Google about using the program 'PUTTY' for serial console access.
    329329
    330330