Changes between Version 9 and Version 10 of malibu/gw3089gblade


Ignore:
Timestamp:
04/17/2023 06:42:29 PM (21 months ago)
Author:
Ron Eisworth
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • malibu/gw3089gblade

    v9 v10  
    88== Getting Started
    99
    10 The GBlade is pre-installed with Ubuntu.
     10The GBlade is pre-installed with Ubuntu Linux. To power the unit use an 802.3at PoE switch or inserter. The bottom 1GbE RJ45 is the PoE port by default. Contact factory for 10GbE PoE options. Typical power consumption is around 10-13W without any additional cards plugged into the NVME socket.
    1111
    12 The GBlade should be powered via PoE.
    1312
    1413=== Serial Console Access
    1514
    16 The GBlade serial console can be accessed through the type C USB port through a cable to a desktop/laptop PC. The serial console will show up as a /dev/ttyUSBx device in Linux and can be accessed through a terminal program with the baud rate of 115,200.
     15Once the unit is powered, the GBlade serial console can be accessed through the type C USB port through a cable to a desktop/laptop PC. The serial console will show up as a /dev/ttyUSBx device in Linux and can be accessed through a terminal program with the baud rate of 115,200.
    1716
    1817[[Image(GW3089serial.JPG,300px)]]
    … …  
    3433== Ethernet
    3534
    36 There are two ports, 1GbE and 10GbE.
     35There are two Ethernet ports, 1GbE (management) and 10GbE (high speed data).
    3736
    38  * (eth1) 1GbE RGMII port is on the left (PoE)
    39  * (eth0) 10GbE XFI port is on the right.
     37 * (eth1) 1GbE RGMII port is on the bottom (PoE by default)
     38 * (eth0) 10GbE XFI port is on the top.
    4039
    41 * Orientation is with Ethernet LED's towards the top
     40[[Image(GW3089ethernet.JPG,300px)]]
    4241
    4342===  PoE
    4443
    45 Isolated 802.3at 1GbE active PoE is supported on the left port.
     44Isolated 802.3at 1GbE active PoE is supported on the bottom port. The Gateworks GW10144 802.3at inserter can be used to power individual units and/or during development. See link here for info on GW10144:
     45https://tsi.tyconsystems.com/doc/SpecSheets/TP-POE+10G__53V_30W_10GB_PoE_Inserter_Spec_Sheet.pdf
    4646
    47 For 10GbE PoE, please contact Gateworks Sales.
     47A 802.3at PoE switch is recommended for rackmount applications.
     48
     49For 10GbE PoE options, please contact Gateworks Sales.
    4850
    4951== NVME Drive
    … …  
    5557A front panel LED is supported.
    5658
    57 When power is applied, the LED will be a solid green.
     59When power is applied, the LED will be a solid green. The LED will present a green heartbeat pattern is shown once the board is booted into Linux.
    5860
    59 The LED will present a green heartbeat pattern is shown once the board is booted into Linux.
     61[[Image(GW3089led.JPG,300px)]]
     62
     63
     64=== LED Programming
    6065
    6166To disable the heartbeat LED:
    … …  
    117122== 1U Rack Front Plate
    118123
    119 A standard 1U rack front plate is available to install QTY 10 GBlade servers in a rack mount scenario. The 1U plate part number is GW3090.
     124A standard 1U rack front plate is available to install QTY 10 GBlade servers in a rack mount scenario. The 1U plate part number is GW3090. Contact sales@gateworks.com to purchase.
    120125
    121126== Gateworks System Controller