Changes between Version 2 and Version 3 of malibu/gw3089gblade

Timestamp:

04/14/2023 07:42:49 PM (20 months ago)

Author:

Ryan Erbstoesser

Comment:

add more items

malibu/gw3089gblade

@@ -14 +14 @@
 }}}
 
+Once connected via the USB cable, SSH can be enabled with instructions here: [wiki:ubuntu#SSHServer]
+
+Any server software (LAMP stack, etc) can then be installed with the package manager. 
+{{{
+apt-get update
+apt-get install {your package}
+}}}
 
 
@@ -31 +38 @@
 == NVME Drive
 
-The GBlade needs to be opened up to install a 2280 NVME flash storage drive. 4 lanes of PCIe is supported.
+The GBlade needs to be opened up to install a 2280 M-Key NVME flash storage drive. 4 lanes of PCIe is supported.
 
 == LED
@@ -39 +46 @@
 == Cooling Fan
 
-The fan runs at specific setpoints
+The fan runs at specific setpoints.
+Note also the processor will throttle down if the fan isn't able to achieve proper cooling. 
 
+== 1U Rack Front Plate
+
+A standard 1U rack front plate is available to install QTY 10 GBlade servers in a rack mount scenario. The 1U plate part number is GW3090.
+
+== Wireless
+
+Wireless was not intended for this ethernet connected blade server.