Version 1 (modified by Ryan Erbstoesser, 14 months ago) ( diff )

start page

GW3089 GBlade Server Blade

Getting Started

The GBlade is pre-installed with Ubuntu.

The GBlade should be powered via PoE.

The GBlade serial console can be accessed through the type C USB port through a cable to a desktop/laptop PC. The serial console will show up as a /dev/ttyUSBx device in Linux and can be accessed through a terminal program with the baud rate of 115,200.


sudo screen /dev/ttyUSB1 115200,cs8


Isolated 802.3at 1GbE active PoE is supported on the left port.

For 10GbE PoE, please contact Gateworks Sales.


The 1GbE port is on the left, and the 10GbE port is on the right.

NVME Drive

The GBlade needs to be opened up to install a 2280 NVME drive. 4 lanes of PCIe is supported.

Attachments (11)

Download all attachments as: .zip

Note: See TracWiki for help on using the wiki.