Changes between Version 9 and Version 10 of newport/DigitalIO


Ignore:
Timestamp:
10/23/2019 09:18:45 PM (5 years ago)
Author:
Cale Collins
Comment:

fixed misinformation.

Legend:

Unmodified
Added
Removed
Modified

  • newport/DigitalIO

    v9 v10  
    99The various Newport product hardware manuals contain a table of what pins on the Digital IO connector routes to what CN80XX GPIO. For convenience this information is also provided in the table below.
    1010
    11 Note that all four DIO signals contain an internal weak pulldown approximately 50kohm.  See Operating manual "Specifications", "Electrical" section for information on DIO max and min driving strength. PWM is not available on Newport family products. 
     11Note that all four DIO signals contain an internal weak pulldown approximately 50kohm.  See Operating manual "Specifications", "Electrical" section for information on DIO max and min driving strength. PWM is not supported by the CN80XX SOC. 
    1212
    1313Newport GPIO Mapping: