Changes between Version 105 and Version 106 of pcn

Timestamp:

02/22/2023 10:04:02 PM (21 months ago)

Author:

Ryan Erbstoesser

Comment:

update 92 formatting

pcn

@@ -806 +806 @@
 * Date: 02-21-2023
 * The GW16099-G & G.1 JTAG Dongle that comes in the GW11033 kit and all other development kits has an errata. The JTAG device can cause a Gateworks single board computer Gateworks System Controller (GSC) to be held in reset, thus preventing the board from booting. If this is happening, please email Gateworks support (support @ gateworks.com ) to discuss a solution.
-
-This is fixed in revision GW16099-G.2 and GW16099-J.
+* This is fixed in revision GW16099-G.2 and GW16099-J.
 
 Typical behavior varies per product family:
 
-Venice:
+* Venice:
+{{{
 U-Boot SPL 2022.07-g3f9ffe03cd (Dec 02 2022 - 01:58:19 +0000)
 wait_for_sr_state: failed sr=20 cr=b8 state=202
@@ -817 +817 @@
 i2c_imx_stop:trigger stop failed
 ^^^ repeats messages about I2C
-
-Newport:
+}}}
+
+ * Newport:
+{{{
 ERROR: N0.TWSI0: SCL is stuck low
 ERROR: N0.TWSI0: Timeout waiting for operation to complete
 WARNING: N0.TWSI0: Timeout waiting for read to complete...start recovering process
 ^^^ I2C failures shown during the first few seconds of boot
-
-Ventana:
+}}}
+
+ * Ventana:
+{{{
 U-Boot SPL 2017.05-g2cc11afac1 (Apr 14 2022 - 00:10:38)
-
-
-
+}}}
+
+
+