Changes between Version 44 and Version 45 of poe

Timestamp:

02/27/2023 08:44:42 PM (21 months ago)

Author:

Tim Harvey

Comment:

removed Laguna info (EOL)

poe

@@ -46 +46 @@
 ||          || GW5910  || half-rectified^^^3^^^ 802.3af || Jumper^^^1^^^ ||
 ||          || GW5913  || half-rectified^^^3^^^ 802.3at || ||
-|| ||
-|| Laguna   || GW2388  || half-rectified^^^3^^^ Passive (both ports) || Jumper^^^2^^^ || 
-||          || GW2386  || full-rectified 802.3af || Jumper^^^2^^^ ||
-||          || GW2387  || full-rectified 802.3af || Jumper^^^2^^^ ||
-||          || GW2391  || full-rectified 802.3af || Jumper^^^2^^^ ||
-||          || GW2380  || Passive^^^3^^^ (up to 42V) || Jumper^^^2^^^ ||
-||          || GW2382  || Passive^^^3^^^ (up to 42V) || Jumper^^^2^^^ ||
 1. Jumper W1 selects passive (install) vs 802.3af (remove) voltage range
-2. Jumper W1 selects passive (ext) vs 802.3af (std) voltage range. See [#emulation below] for details on the 802.3af emulation
 3. Half-rectified or Passive PoE on Gateworks boards assumes positive on blue pair, negative on brown pair. A cross-over cable can be used for devices using the opposite polarity
 
@@ -137 +129 @@
 || [https://shop.gateworks.com/index.php?route=product/product&path=70_73&product_id=17 GW10054 GigE Ethernet Passive POE Injector] || Passive || requires external power supply ||
  1. Requires cross-over cable if using with a Gateworks board on a port that has half-rectified passive PoE (ie Ventana)
- 2. This product is not compatible with the [#half-rectified half rectified 802.3af] used on certain Ventana and Laguna products
+ 2. This product is not compatible with the [#half-rectified half rectified 802.3af] used on certain Ventana  products
 
 = PoE Output