Changes between Version 6 and Version 7 of venice/gw7500


Ignore:
Timestamp:
03/30/2026 03:58:47 PM (2 hours ago)
Author:
Ryan Erb
Comment:

add note for j14 speeds

Legend:

Unmodified
Added
Removed
Modified

  • venice/gw7500

    v6 v7  
    9595This is a USB TYPE-C that can support USB 3.0 peripheral and power delivery to the board.
    9696
     97For using this USB in peripheral mode (OTG) see more information here: [wiki:linux/OTG]
     98
     99Note, J14 has been tested with the USB in USB Ethernet Gadget mode and observed around 1.3Gbps 'ethernet' speeds using iperf3 over UDP.
     100
     101The GW7500 can be powered using the the J14 USB Type-C connector using a USB-C charger. The USB-C power profile supports the following profiles by default:
     102
     103 - PDO1 (low priority) 5V@1.5A
     104 - PDO2 (medium) 15V@1.5A
     105 - PDO3 (high priority) 20V@1.0A
     106
     107Other profiles can be programmed into the controller as well. Contact support for other options.
     108
     109Depending on the type of cards loaded in the Mini-PCIe sites PD02 or PD03 profiles might be required. The board typically runs at 2.5W without any Mini-PCIe cards installed.
     110
    97111=== J1 USB
    98112