Changes between Version 41 and Version 42 of venice/mipi

Timestamp:

06/07/2024 10:12:01 PM (6 months ago)

Author:

Ron Eisworth

Comment:

--

venice/mipi

@@ -116 +116 @@
 For boards using the GW7020 SOM based on the i.MX8M Plus, the MIPI signals were used to support CAN bus so this connector can be used to access those signals. Note the CAN signals are 3.3V TTL level and an external transceiver would need to be added to support CAN signaling. 
 
-||= GW16145 50-Pin No. =||= Signal Name =||
-||         25           ||    CAN1_TXD   ||
-||         27           ||    CAN1_RXD   ||
-||          8           ||    CAN2_TXD   ||
-||         10           ||    CAN2_RXD   ||
+||= GW16145 50-Pin No. =||=  Signal Name  =||
+||         25           ||    CAN1_TXD     ||
+||         27           ||    CAN1_RXD     ||
+||          8           ||    CAN2_TXD     ||
+||         10           ||    CAN2_RXD     ||
 
 For additional CAN bus info see the following link: