Changes between Version 17 and Version 18 of ventana/thermal


Ignore:
Timestamp:
04/03/2018 05:37:42 PM (7 years ago)
Author:
Ryan Erbstoesser
Comment:

add info about heating up board before removal

Legend:

Unmodified
Added
Removed
Modified

  • ventana/thermal

    v17 v18  
    111111
    112112
    113 The stock heatsink is attached with a thermal tape which can be loosened by carefully twisting the heatsink from side to side. Note this should be done gently to avoid damaging the CPU. See video link below for demonstration:
     113The stock heatsink is attached with a thermal tape which can be removed.
     114
     115Please read the following instructions for removal:
     1161. Let the Gateworks board run for roughly 30 minutes to get the heatsink warm
     1172. Loosen the heatsink by carefully twisting the heatsink from side to side. Note this should be done gently to avoid damaging the CPU.
     118
     119See video link below for demonstration:
    114120
    115121[[Image(heatsink.PNG,200px,link=http://trac.gateworks.com/attachment/wiki/ventana/thermal/Heatsink.MOV)]]