Changes between Version 144 and Version 145 of wireless/wifi


Ignore:
Timestamp:
06/25/2026 08:50:41 PM (18 hours ago)
Author:
Ryan Erb
Comment:

add antenna for 17052

Legend:

Unmodified
Added
Removed
Modified

  • wireless/wifi

    v144 v145  
    112112     * Preliminary testing shows 6.1 or newer kernel is required & a signed board-2.bin file needs to be placed in the /lib/firmware/ath11k/WCN6855/hw2.1 folder on a running target. This would be using the ath11k open source driver. Silex however recommends using Qualcomm’s LEA driver built using Silex's instructional PDF.             
    113113     * While it supports 2.4GHz, 5.8GHz and 6GHz, you can only select two active frequency at once.   For example, 2.4GHz and 6GHz etc.    The AP feature is a soft AP so it can support up to 32 clients. For an AP specific card, see the [https://www.silextechnology.com/connectivity-solutions/embedded-wireless/sx-pceax-ap6e SX-PCEAX-AP] which supports 128 clients. See Below.
    114 
     114     * Antennas, see suggested chart: 
     115      * [[Image(gw17052antenna.png,300px)]]
    115116     * Supported Modes with Silex Driver:
    116117      {{{
    … …  
    125126     * Please contact Silex for more support
    126127
    127 ==== Silex SX-PCEAX-AP 802.11ax 2x2 QCA (Qualcomm QCN9072)
     128==== Silex SX-PCEAX-AP 802.11ax 2x2 QCA (Qualcomm QCN9072) (GW17052)
    128129
    129130This is a radio specifically designed to be an AP (access point) and can support up to 128 clients.