Changes between Version 18 and Version 19 of wireless/wifi


Ignore:
Timestamp:
03/16/2018 10:20:56 PM (7 years ago)
Author:
Cale Collins
Comment:

fixed fes image

Legend:

Unmodified
Added
Removed
Modified

  • wireless/wifi

    v18 v19  
    7676[http://www.doodlelabs.com/ Doodlelabs] creates frequency shifting modules to allow frequencies between 700MHz - 6.5GHz, while using standard linux drivers. These systems are comprised of one ath9k/ath10k radio with a FES module on each chain. The below picture will help visualize this:
    7777
    78 [[Image(http://www.doodlelabs.com/wp-content/uploads/FES2-e1425744871125.png, 256px)]]
     78[[Image(Prism-FES-1.png, 256px)]]
    7979
    8080In this system, a radio has two separate FES modules per chain. From the factory, Doodlelabs calibrates each chain on a specific radio to a particular FES module. This means that a radio with 2 chains is specifically paired with two FES modules. You can find which FES modules are paired with what radio by comparing serial numbers (Hint: all components in the system have the same serial). It's very highly recommended by Doodlelabs that nothing is mixed and matched.