wiki:newport

Version 104 (modified by Tim Harvey, 4 years ago) ( diff )

fixed typo

Gateworks Newport Family Support


Getting Started
Newport Software
Peripherals
User Manuals

Wireless / WiFi Radios
Cellular Modems
GPS
3D Model

  1. Gateworks Newport Family Support
  2. Links
    1. Software
    2. Peripheral Support
    3. Performance / Processor / Memory / Power / Thermal
    4. Other Info
    5. User Manuals
    6. Processor Reference Manual / Datasheet / Errata
    7. Entire Raw Index of Newport Wiki Pages
  3. Newport Software
    1. Choosing a BSP
    2. Newport BSP Software Support Comparison
    3. Ubuntu
    4. OpenWrt Board Support Package (BSP)
  4. Third Party Linux Distros
      1. Root filesystem Sources
  5. Mainline Linux Kernel support
  6. Creating a microSD recovery image
  7. Boot Device
      1. Booting to a kernel/rootfs on the microSD

The Gateworks Newport product family utilizes the Cavium ARM ThunderX CN80xx / CN81xx SoC (System On Chip) offering a large variety of peripherals with a focus on Networking, and Security. See ​here for a product comparison matrix.

Links

Please note: This is a subset of information for Newport, however, please visit our Main Wiki for all other information

Software

Peripheral Support

Performance / Processor / Memory / Power / Thermal

Gateworks uses the Cavium Octeon TX on the Newport family.

All Newport standard models come default with a Dual Core processor. Quad core processors are available on customized orders over 100 pieces or on some max configuration standard boards end in digit '4', such as the GW6304, etc. Ordering options are spelled out on the Newport Order Options Wiki Page

The Cavium CPU part numbering scheme is as follows:

  • CN802x - Dual Core
    • x=0 - BGA676 (used on the larger boards like GW6300)
    • x=1 - BGA555 (used on the smaller boards like GW6100)
  • CN803x - Quad Core
    • x=0 - BGA676 (used on the larger boards like GW6304)
    • x=1 - BGA555 (used on the smaller boards like GW6204)

Other Info

User Manuals

Processor Reference Manual / Datasheet / Errata

Entire Raw Index of Newport Wiki Pages

Newport Software

Newport Software is comprised of many pieces, including the following:

  • GSC (Gateworks System Controller)
  • Boot Firmware
  • U-Boot Bootloader
  • Operating System (including kernel / rootfs)

Ubuntu is pre-installed on all Newport boards before they ship.

Please view the following links for the appropriate software section:

Choosing a BSP

Gateworks offers several Board Support Packages for the Newport Product family. Which one we recommend depends a bit upon what your goal is and what your experience level is. Note: By default Newport boards are pre-programmed with Ubuntu.

  • Ubuntu
    • Recommended for developers trying to heavily leverage opensource software packages or libraries that are not supported by the other BSP's. This is the most user-friendly for developers new to Embedded Linux but will not produce a very trimmed down filesystem image.
    • Able to use mainline kernel.
    • Supports all Newport features.
    • Documentation provided to use Ubuntu pre-built packages and debootstrap to create a root filesystem in minutes
    • Native compilation: no SDK or cross-toolchain needed
  • OpenWrt - intended for wireless routers and access points (low flash and memory footprint)
    • Recommended for networking users wanting to create a headless router, VPN, basestation, wireless access point and more. Produces by far the smallest storage and memory footprint but users new to Embedded Linux will have a bit of a learning curve
    • Fairly up-to-date and/or vanilla kernel support
    • Latest wireless drivers (via linux-backports)
    • Custom application config and init system (nice for small footprint, but can make adding support for additional packages more work)
    • Wide variety of packages (including a fairly nice web-admin)
    • Console-based build system (expect 60mins to build BSP for a specific board family)
    • Downloadable SDK and Toolchain available to build apps on a development host without building the entire BSP
    • easy firmware upgrade (sysupgrade) and factory-default reset mechanism
    • Pre-built images available

Newport BSP Software Support Comparison

The following table shows details on current device support per BSP:

Feature OpenWrt Ubuntu Notes
Version 18.0x 18.04 (Bionic)
Kernel 4.14.x 4.14.x
RS232 Yes Yes
MMC Yes Yes
SPI Yes Yes 1
GPS / GPS PPS Yes Yes
RTC Yes Yes
HWMON Yes Yes
LED/GPIO Yes Yes
USB 3.0 Yes Yes
PCI Yes Yes
SATA Yes Yes
crypto Yes Yes 4
CAN Yes Yes 5
RS485 Yes Yes 2
ventana/expansion GW16081 Not Yet Yes 3
ventana/expansion GW16082 Yes Yes 3
ventana/expansion GW16083 Not Yet Not Yet 3
  1. SPI does not currently support full-duplex - issue is being investigated with Cavium
  2. RS485 has not yet been fully validated but uses the same shared transceiver as RS232 which has been validated. RS485 half duplex mode would require adding support for TIOCSRS485 or managing the TXEN GPIO (gpio12) from userspace.
  3. Requires a board with a Mezzanine connector.
  4. HW Compression offload is supported (DEV_CAVIUM_ZIP drivers/crypto/cavium/zip.c) and crypto is supported (CAVIUM_CPT drivers/crypto/cavium) although there may be additional features that could be supported with additional driver work.
  5. CAN is supported on certain board models and revisions and requires some kernel patches. See here and here from the Gateworks canbus page.

Ubuntu

Gateworks offers a pre-built Ubuntu distribution using the latest Gateworks kernel as well as instructions on how to build your own Ubuntu based distribution.

OpenWrt Board Support Package (BSP)

The Newport OpenWrt BSP provides the following:

  • Linux 4.x kernel (fairly vanilla)
  • Latest wireless drivers (compat-wireless)
  • Simple upgrades and factory-reset capability provided by overlay filesystem

Third Party Linux Distros

While Gateworks cannot fully support all Linux distros, it is relatively simple to overlay a Gateworks Newport kernel onto any non-Gateworks third party Linux distro rootfs image.

The following links will describe what is needed:

  1. Linux kernel supporting Newport: linux/kernel
  2. Root Filesystem: see below
  3. Bootable media: linux/blockdev

Root filesystem Sources

There are several sources of pre-built root filesystems that are compatible with Newport. As Newport uses an ARM 64bit based SoC, you need to use something that is compatible with an ARMv8 instruction set. Many pre-built distributions will reference 'arm64' which means 'ARM 64-bit' which is appropriate for the CN80XX / CN81XX SoC.

Some popular third-party sources:

  • ​Ubuntu Core - this is a minimal filesystem that you can build off of at runtime by adding packages from various repositories.
  • ​Linaro - Linaro has several root filesystems including server, nano, developer, core, and ALIP. Each root filesystem will have different things installed for different purposes. Choose carefully which will work for you.

Notes:

  • some root filesystems may require you to manually add a user before booting (ie Ubuntu Core)
  • the default Newport bootloader expects to find the Image in the /boot directory on the 2nd partition of type ext2/3/4

Mainline Linux Kernel support

Gateworks actively participates in the development of the Linux kernel.

Cavium licenses CPU core IP from ARM and the name they give the CPU core within the OCTEON-TX CN80XX / CN81XX is the Cavium 'ThunderX'. Therefore many of the peripheral drivers within the Linux kernel have 'thunderx' in their name and more often then not the 'OCTEON' name refers to the older OCTEON MIP64 core.

The following table shows what OCTEON-TX CN80XX / CN81XX peripherals support is available in the mainline kernel starting from 4.13:

Feature Support Notes
SMP Yes ARCH_THUNDER
serial UART (SBSA) Yes SERIAL_AMBA_PL011 drivers/tty/serial/amba-pl011.c
watchdog Watchdog (SBSA) Yes ARM_SBSA_WATCHDOG drivers/watchdog/sbsa_gwdt.c
I2C Yes (4.9+) I2C_THUNDERX drivers/i2c/busses/i2c-{octeon-core,thunderx-pcidrv}.c
Networking BGX (SGMII) Yes (4.2+) THUNDER_NIC_BGX drivers/net/ethernet/cavium/thunder/thunder_bgx.c
Networking RGX (RGMII) Yes (4.9+) THUNDER_NIC_RGX drivers/net/ethernet/cavium/thunder/thunder_xcv.c
Networking MDIO (PHY) Yes (4.6+) MDIO_CAVIUM/MDIO_THUNDER drivers/net/phy/mdio-{cavium,thunder}.c
PCI Yes (4.6+) PCI drivers/pci/host/pci-thunder-{ecam,pem}.c
SPI1 Yes (4.9+) SPI_THUNDERX drivers/spi/spi-thunderx.c
MMC eMMC / microSD Yes (4.12+) MMC_CAVIUM_THUNDERX drivers/mmc/host/thunderx-mmc.c
HW RNG (Hardware Random Number Generator) Yes (4.9+) HW_RANDOM_CAVIUM drivers/char/hw_random/cavium-rng*.c
HW Compressions offload Yes (4.12+) DEV_CAVIUM_ZIP drivers/crypto/cavium/zip.c
Crypto Yes (4.11+) DEV_CAVIUM_CPT drivers/crypto/cavium
RTC Yes RTC_DRV_DS1672 drivers/rtc/rtc-ds1672.c
LED/GPIO Yes (4.14+) GPIO_THUNDERX drivers/gpio/gpio-thunderx.c
USB 3.0 Yes USB_XHCI_PCI
mSATA Yes SATA_AHCI
  1. Cavium ThunderX SPI hardware only supports half-duplex SPI. Linux drivers that use full-duplex transactions can be modified to support half-duplex (see ​can:mcp251x: convert driver to half-duplex SPI as en example

There are a number of features that are enabled in the ​Gateworks Newport Kernel which are not yet in mainline. You can look over the patches to our kernel to implement them without much difficulty:

  • GSC drivers
  • GW16081 support - see ​here
  • CAN support - see ​here
  • RGMII PHY internal delay fix - see ​here
  • SGMII PHY underflow fix - see ​here

The following kernel configs should be enabled for the OCTEON-TX CN80XX / CN81XX:

  • SERIAL_AMBA_PL011 - ARM SBSA UART
  • MMC_CAVIUM_THUNDERX - MMC
  • EDAC_THUNDERX - Error Detection and Correction (works with 'edac-util' app from 'edac-utils' package)
  • GPIO_THUNDERX - General Purpose I/O
  • SPI_THUNDERX - SPI Controller
  • I2C_THUNDERX - I2C Controller
  • THUNDERX_NIC_VF - NIC virtual function
  • THUNDERX_NIC_PF - NIC physical function
  • THUNDERX_NIC_BGX - Network Controller (selects MDIO_CAVIUM/MDIO_THUNDER)
  • THUNDERX_NIC_RGX - RGMII Network Controller (selects MDIO_CAVIUM/MDIO_THUNDER)
  • MDIO_THUNDER (selected automatically by THUNDERX_NIC*)
  • MDIO_CAVIUM (selected automatically by THUNDERX_NIC*)
  • PCI_HOST_THUNDER_PEM - PCI host controller
  • PCI_HOST_THUNDER_ECAM - Enhanced Configuration Access Mechanism for PCIe memory mapped I/O
  • ARM_SBSA_WATCHDOG - ARMv8 Watchdog
  • CRYPTO_DEV_CAVIUM_ZIP - Hardware Compression / Decompression off-load
  • HW_RANDOM_CAVIUM - Hardware accelerated random number generator

Note that there are many kernel drivers using the name 'Octeon' but they typically refer to a different chipset and the CN80XX / CN81XX have more in common with the Cavium 'ThunderX' architecture as that is the SoC core.

For details Newport Linux kernel:

Creating a microSD recovery image

Click Here

Boot Device

Some boards have multiple boot device and may allow selection of which one is the 'primary boot device':

board Primary Boot Device Alternate Boot Device
GW640x on board eMMC microSD
GW630x on board eMMC microSD
GW620x on board eMMC microSD
GW610x on board eMMC -

To boot from the alternate boot device manually you can press-and-release the user pushbutton 5 times in a row and the board will power cycle primary power (the 3.3V LED will go off, then on again) and the board will boot from the alternate boot device.

Boards with an Alternate boot device also have a boot watchdog such that if the current boot device fails to boot within 30 seconds, the board will power cycle primary power and attempt boot from the other boot device.

The bootloader also has a notion of boot device, either the built in eMMC or an external microSD. This is controlled through the UBoot variable 'dev'. The dev variable is purely for the bootloader, and does not signify what device to boot the kernel/rootfs from.

Note if booting with the onboard eMMC as the primary boot device, “0/mmcblk0” is the U-Boot/Linux device node for eMMC and “1/mmcblk1” is the U-Boot/Linux device node for microSD. When booting from the alternate device (microSD) this is swapped.

Please also reference:

Booting to a kernel/rootfs on the microSD

Click Here

Attachments (3)

Download all attachments as: .zip

Note: See TracWiki for help on using the wiki.