Changes between Version 22 and Version 23 of expansion/gw16126


Ignore:
Timestamp:
05/09/2019 09:12:33 PM (6 years ago)
Author:
Cale Collins
Comment:

updated and moved SIM section

Legend:

Unmodified
Added
Removed
Modified

  • expansion/gw16126

    v22 v23  
    5151  * This can be handy to disable if a lot of continuous data is required. It may help to disable eDRX (with the +CEDRXS command). In general, u-blox recommends disabling eDRX, which is currently default enabled in several of the +UMNOPROF profiles.
    5252 * More information can be found online about these items, including this article [https://www.link-labs.com/blog/lte-e-drx-psm-explained-for-lte-m1 here]
     53
     54[=#sim]
     55=== CAT M1 SIM Support
     56Note that the CAT M1 modem requires a CATM1 SIM from a carrier. These SIMs are typically different than the standard LTE SIMs (used in your phone) but depends on the provider.
     57
     58Gateworks has included and recommends a SIM from Hologram. The Hologram SIM does not have to be specific to CATM1.
     59* Obtain a SIM here: [https://hologram.io/] 
     60* Activate the included SIM here: [https://hologram.io/docs/guide/connect/connect-device/]
     61
     62
     63 
     64[https://www.digikey.com/products/en?keywords=1477-1051-ND We have tested this Verizon SIM as well]. '''Note''' this SIM will not automatically work with the GW16126 because the GW16126 is not end device certified with Verizon. Customers will need to work with their particular cellular carrier to get test SIMs that will work properly with the modem. Certification should also be discussed at the same time.
     65
     66One may also want to disable system updates that may run in the background on the OS that is being used to avoid any overages on the SIM data plan.
    5367
    5468[=#software]
    … …  
    8498
    8599''' Note, because this modem uses raw-ip, the IP from the provider will not automatically be applied to the interface. The provider will give an IP and then it must manually be applied to the wwan0 interface.'''
     100
     101
    86102
    87103==== Connection Examples ====
    … …  
    302318
    303319
    304 === CAT M1 SIM Support ===
    305 Note that the CAT M1 modem may require a CATM1 SIM from the carriers. These SIMs are typically different than the standard LTE SIMs (used in your phone) but depends on the provider.
    306 
    307 Gateworks has tested and recommends at this time a SIM from Hologram. The Hologram SIM does not have to be specific to CATM1. Obtain a SIM here: [https://hologram.io/]
    308 
    309  
    310 The following Verizon SIM has been tested and is available [https://www.digikey.com/products/en?keywords=1477-1051-ND here]. '''Note''' this SIM will not automatically work with the GW16126 because the GW16126 is not end device certified with Verizon. Customers will need to work with their particular cellular carrier to get test SIMs that will work properly with the modem. Certification should also be discussed at the same time.
    311 
    312 One may also want to disable system updates that may run in the background on the OS that is being used to avoid any overages on the SIM data plan.
    313  
    314 
    315320[=#nina-b3]
    316321== u-blox NINA-B301 BLE module