Changes between Version 10 and Version 11 of gettingstarted


Ignore:
Timestamp:
05/18/2020 09:28:15 PM (5 years ago)
Author:
Cale Collins
Comment:

update firmware note

Legend:

Unmodified
Added
Removed
Modified

  • gettingstarted

    v10 v11  
    1616 1. Gateworks Single Board Computer
    1717 1. Power supply (there are many options here, please use the supply sent with the development kit to get started)
    18  1. JTAG USB Programmer - not required but '''VERY''' helpful. Used for programming board and serial console access. (Included in development kit) More info on JTAG [wiki:jtag_instructions here]
     18 1. JTAG USB Programmer - not required but '''VERY''' helpful. Used for programming board and serial console access.   (Included in development kit) More info on JTAG [wiki:jtag_instructions here]
    1919 1. Operating Manuals are also available online at [https://www.gateworks.com/products/] on each specific product webpage under the documentation tab
     20 1. Latest firmware, is available to download from [http://dev.gateworks.com/].    After verifying your newly purchased board will boot, be sure to update its bootloader and GSC firmware to the latest version. 
    2021 
    2122= Physical Connections =