Changes between Version 23 and Version 24 of gettingstarted

Timestamp:

07/07/2023 10:00:11 PM (17 months ago)

Author:

Ryan Erbstoesser

Comment:

add more warnings about ground loop

gettingstarted

@@ -20 +20 @@
  1. Power supply (there are many options here, please use the supply sent with the development kit to get started)
  1. JTAG USB Programmer - Used for programming board and serial console access.   (Included in development kit) More info on JTAG [wiki:jtag_instructions here]
+  1. *** WARNING *** Protect the JTAG dongle from a ground loop described here: [#Power]
  1. Operating Manuals are also available online at [https://www.gateworks.com/products/] on each specific product webpage under the documentation tab
  1. Latest firmware, is available to download.    After verifying your newly purchased board will boot, be sure to update its bootloader and GSC firmware to the latest version. Instructions on how to flash the new firmware is available on individual product family wiki pages [http://trac.gateworks.com/#BoardFamilies here]. Actual firmware files are available for download at [http://dev.gateworks.com/]
@@ -26 +27 @@
 = Physical Connections =
 '''Please note the SBC is a sensitive electronic device and it should be handled carefully to prevent damage and exposure to ESD especially when not contained in an enclosure. See the following handling guidelines. 
+
+*** WARNING *** Protect the JTAG dongle from a ground loop described here: [#Power]
 * The SBC should be placed on an ESD protected surface or mat and the operator should wear ESD heel or wrist straps when directly working with the board. 
 * When connecting any cables or the power supply, make sure to touch the ESD surface before making contact with the board. 
@@ -57 +60 @@
  * USB JTAG Dongle (included with development kits, or sold separately  [https://shop.gateworks.com/index.php?route=product/category&path=70_80 JTAG Purchase Link]
   * This JTAG Dongle device is necessary for serial console access.
+  * The JTAG dongle has a small green LED in the hole on the top that should light up when plugged in
+  
+*** WARNING *** Protect the JTAG dongle from a ground loop described here: [#Power]
 
 Example Configuration: