Changes between Version 4 and Version 5 of venice/errata

Timestamp:

07/06/2022 06:18:18 PM (2 years ago)

Author:

Tim Harvey

Comment:

added errata for GPY111 ESD

venice/errata

@@ -105 +105 @@
 
 
+[=#vn6]
+== VN6 GPY111 limited ESD protection
+
+Issue:
+ * The GPY111 PHY used on a variety of boards lacks internal ESD protection to the level of modern standards which could result in network functionality being permanently limited due to ESD cable hot-plug events.
+
+Workaround:
+ * For outdoor applications and boards that could be exposed to electrical events, we would recommend you use an external RJ45 surge protector. The following product also additionally helps to protect against lightning events up to IEC 61000-4-5 (Lightning) 40A (8/20us):
+  - [http://datasheet.watchfuleyesolutions.com/US121101.html Watchful Eye WTH-SG/RJ45-S, US121101X] (Also available on Amazon)
+
+Resolution:
+ * additional ESD protection has been added between the GPY111 PHY and magnetics to the RJ45. Note that for GW71xx/GW72xx/GW73xx the GPY111 PHY is on the SoM and the external ESD protection is on the baseboard.
+
+Affected Products:
+ - GW710x-A/B/C baseboard with GW700x-E+ SoM
+ - GW720x-A/B/C/D baseboard with GW700x-E+ SoM
+ - GW730x-A/B/C baseboard with GW700x-E+ SoM
+ - GW740x-A
+
+Resolved on:
+ - GW710x-D (PCB 02210196-03)
+ - GW720x-E (PCB 02210197-04)
+ - GW730x-D (PCB 02210198-03)
+ - GW740x-B (PCB 02210199-01)
+
+To determine if your board is affected use the 'gsc' command in U-Boot to see the model of the GW700x SoM and the baseboard:
+{{{#!bash
+u-boot=> gsc
+GSCv3   : v61 0x1d6f RST:VIN Thermal protection:enabled at 96C
+RTC     : 2022-07-06  17:52:43 UTC
+Model   : GW7200-00-B1C1
+Serial  : 856948
+MFGDate : 01-22-2021
+SOM     : GW7000-C1 856948 01-22-2021
+BASE    : GW7200-B1 869388 05-12-2021
+}}}
+ * this example shows a GW7000-C.1 SoM on a GW7200-B.1 baseboard.
+
+Contact sales@gateworks.com if you need assistance