wiki:venice

Version 3 (modified by Cale Collins, 4 years ago) ( diff )

temporary fix for broken link

Gateworks Venice Family Support


Getting Started

Venice Software

Peripherals

User Manuals

Wireless / WiFi Radios

Cellular Modems

GPS

3D Model

The Gateworks Venice product family utilizes the NXP i.MX8M Mini (i.MX8MM) SoC (System On Chip) family offering a large variety of peripherals with a focus on Networking, Security, and Media. See ​here for a product comparison matrix.

Links

Please note: This is a subset of information for Venice, however, please visit our Main Wiki for all other information

Software

Peripheral Support

Other Info

User Manuals

Entire Raw Index of Venice Wiki Pages

Venice Software

Venice Software is comprised of many pieces, including the following:

  • GSC (Gateworks System Controller) Firmware
  • Boot Firmware (ARM Trusted Firmware, DDR controller Firmware, U-Boot Bootloader)
  • Operating System (including kernel / rootfs)

Ubuntu is pre-installed on all Venice boards before they ship.

Please view the following links for the appropriate software section:

Choosing a BSP

Gateworks offers several Board Support Packages for the Venice Product family. Which one we recommend depends a bit upon what your goal is and what your experience level is. Note: By default Venice boards are pre-programmed with and Ubuntu root filesystem and Gateworks kernel.

  • Ubuntu
    • Recommended for developers trying to heavily leverage opensource software packages or libraries that are not supported by the other BSP's. This is the most user-friendly for developers new to Embedded Linux but will not produce a very trimmed down filesystem image.
    • Able to use mainline kernel.
    • Supports all Venice features.
    • Documentation provided to use Ubuntu pre-built packages and debootstrap to create a root filesystem in minutes
    • Native compilation: no SDK or cross-toolchain needed
  • Buildroot - intended for custom applications (low flash and memory footprint)
    • Fairly up-to-date and/or vanilla kernel support
    • Wide variety of packages (including a fairly nice web-admin)
    • Console-based build system
    • Downloadable SDK and Toolchain available to build apps on a development host without building the entire BSP

Ubuntu

Gateworks offers a pre-built Ubuntu distribution using the latest Gateworks kernel as well as instructions on how to build your own Ubuntu based distribution.

Third Party Linux Distros

While Gateworks cannot fully support all Linux distros, it is relatively simple to overlay a Gateworks Venice kernel onto any non-Gateworks third party Linux distro rootfs image.

The following links will describe what is needed:

  1. Linux kernel supporting Venice: linux/kernel
  2. Root Filesystem: see below
  3. Bootable media: linux/blockdev

Root filesystem Sources

There are several sources of pre-built root filesystems that are compatible with Venice. As Venice uses an ARM 64bit based SoC, you need to use something that is compatible with an ARMv8 instruction set. Many pre-built distributions will reference 'arm64' which means 'ARM 64-bit' which is appropriate for the i.MX8MM SoC.

Some popular third-party sources:

  • Ubuntu Core - this is a minimal filesystem that you can build off of at runtime by adding packages from various repositories.
  • Linaro - Linaro has several root filesystems including server, nano, developer, core, and ALIP. Each root filesystem will have different things installed for different purposes. Choose carefully which will work for you.

Notes:

  • some root filesystems may require you to manually add a user before booting (ie Ubuntu Core)

Mainline Linux Kernel support

Gateworks actively participates in the development of the Linux kernel.

Mainline Linux Kernel support

Gateworks actively participates in the development of the Linux kernel.

The following table shows what i.MX8MM support is available in the mainline kernel:

item DT compatible driver kconfig kernel
audio card simple-audio-card sound/soc/generic/simple-card.c CONFIG_SND_SIMPLE_CARD
mmc fsl,imx7d-usdhc drivers/mmc/host/sdhci-esdhc-imx.c CONFIG_MMC_SDHCI_ESDHC_IMX
sdma fsl,imx7d-sdma drivers/dma/imx-sdma.c CONFIG_IMX_SDMA
uart fsl,imx6q-uart imx-uart: drivers/tty/serial/imx.c CONFIG_SERIAL_IMX
ethernet fsl,imx6sx-fec fec: drivers/net/ethernet/freescale/fec_main.c CONFIG_FEC
i2c fsl,imx21-i2c drivers/i2c/busses/i2c-imx.c CONFIG_I2C_IMX
spi fsl,imx51-ecspi drivers/spi/spi-imx.c CONFIG_SPI_IMX
gpio fsl,imx35-gpio drivers/gpio/gpio-mxc.c CONFIG_GPIO_MXC
wdog fsl,imx21-wdt drivers/watchdog/imx2_wdt.c CONFIG_IMX2_WDT
pwm fsl,imx27-pwm drivers/pwm/pwm-imx27.c CONFIG_PWM_IMX27
audio dai fsl,imx8mq-sai fsl-sai: sound/soc/fsl/fsl_sai.c CONFIG_SND_SOC_FSL_SAI 5.4
caam fsl,sec-v4.0 drivers/crypto/caam/* CONFIG_CRYPTO_DEV_FSL_CAAM 5.6
ddrc (Dyanmic Scaling for DDR controller) fsl,imx8m-ddrc drivers/devfreq/imx8m-ddrc.c ARM_IMX8M_DDRC_DEVFREQ 5.6
thermal fsl,imx8mm-tmu drivers/thermal/imx8mm_thermal.c IMX8MM_THERMAL 5.7
fspi (Flex SPI) nxp,imx8mm-fspi drivers/spi/spi-nxp-fspi.c SPI_NXP_FLEXSPI 5.7
usb not yet upstream as of v5.7 - should not be a driver change just need USB PM enabled
pci not yet upstream as of v5.7 - needs minor driver support PCIE PM
mipi dsi bridge not yet upstream as of v5.7
mipi csi bridge not yet upstream as of v5.7
vpu/hantro-g1 not yet upstream as of v5.7

See also:

Attachments (1)

Download all attachments as: .zip

Note: See TracWiki for help on using the wiki.