| Version 59 (modified by , 5 years ago) ( diff ) |
|---|
GW16122 - Mini-PCIe Radio for Internet of Things - IoT
Software Disclaimer: This hardware was designed from a Texas Instruments Reference design. Thus, all software support is community supported through Texas Instruments.
Welcome
This wiki page is about the Gateworks GW16122 IoT Radio Card that is based off the TI CC1352P Reference design.
Getting Started
This wiki page is a general overview of the GW16122.
For software, please go to Gateworks CC135x wiki page
Hardware Requirements
All items purchased separately
- 1 x Gateworks Ventana or Newport Single Board Computer
- 2 x Gateworks GW16122 IoT Card
- 2 x Gateworks [GW10124 900Mhz Antenna
- 2 x Gateworks GW10074 MMCX to SMA Female Adapter Cable
- 1 x USB to Mini-PCIe Adapter
- This allows the Gateworks GW16122 to be connected to a Laptop / PC if needed
- Option #1 - Amazon - Requires rubberband to hold GW16122 in
Software
All software information to use the GW16122-B and newer should be found on the Gateworks CC135x wiki page. This is because the CC135x chip is used on many designs.
Attachments (8)
- gw16122webgui.png (49.0 KB ) - added by 7 years ago.
- GW16122.jpg (181.3 KB ) - added by 7 years ago.
- 16122range.png (2.4 MB ) - added by 7 years ago.
- gw16122diagram.png (1.0 MB ) - added by 7 years ago.
- thingsquare1.png (193.5 KB ) - added by 6 years ago.
- thingsquare2.png (149.9 KB ) - added by 6 years ago.
- 16122pins.png (97.4 KB ) - added by 5 years ago.
-
GW16122.PNG
(478.6 KB
) - added by 5 years ago.
GW16122
Download all attachments as: .zip
Note:
See TracWiki
for help on using the wiki.
