GW16122 - Mini-PCIe Radio for Internet of Things - IoT

Software Disclaimer: This hardware was designed from a Texas Instruments Reference design. Thus, all software support is community supported through Texas Instruments.

Welcome

This wiki page is about the Gateworks ​GW16122 IoT Radio Card that is based off the TI CC1352P Reference design.

Getting Started

This wiki page is a general overview of the GW16122.

For software, please go to Gateworks CC135x wiki page

Hardware Requirements

All items purchased separately

• 1 x Gateworks ​Ventana or Newport Single Board Computer
• 2 x Gateworks ​GW16122 IoT Card
• 2 x Gateworks ​GW10124 900Mhz Antenna
• 2 x Gateworks ​GW10074 MMCX to SMA Female Adapter Cable
• 1 x USB to Mini-PCIe Adapter
  • This allows the Gateworks GW16122 to be connected to a Laptop / PC if needed
  • ​Option #1 - Amazon - Requires rubberband to hold GW16122 in

Software

All software information to use the GW16122-B and newer should be found on the Gateworks CC135x wiki page. This is because the CC135x chip is used on many designs.

GW16222 revision A used the CC1350 chip. The GW16122 revision B and onwards uses the CC1352P chip.