| 26 | = Physical Connections = |
| 27 | '''Please note the SBC is a sensitive electronic device and it should be handled carefully to prevent damage and exposure to ESD especially when not contained in an enclosure. See the following handling guidelines. |
| 28 | * The SBC should be placed on an ESD protected surface or mat and the operator should wear ESD heel or wrist straps when directly working with the board. |
| 29 | * When connecting any cables or the power supply, make sure to touch the ESD surface before making contact with the board. |
| 30 | * Do not hot plug any connectors or the power supply. All connections should be made with power off. |
| 31 | * When using the JTAG adapter, make sure the development computer shares the same AC ground as the power supply being used to power the SBC to prevent ground loops. |